Mounting The Microwave Oven - Bosch HMV 3051 U Instrucciones De Instalación

Mounting the microwave
oven
Note: If the bottom of the upper cabinet is recessed or has front overhang, you will
need to prepare 2" x 2" (51 mm x 51 mm - depth equivalent to cabinet recess or
overhang) filler blocks to provide additional support for the bolts:
mark the center of each filler block and drill a \ (9,5 mm) diameter hole
D
align filler blocks over the three openings on top of the microwave oven and
D
attach with masking tape (see Figure 1)
Note: Use at least two people to install the microwave oven. Do not grip or use
handle during the installation.
Note: When mounting the microwave oven, thread power cord through hole in
bottom of top cabinet. Keep the cord tight and do not pinch it, especially when
mounting flush to bottom of cabinet. Do not pull the cord to lift the oven.
1. Lift the microwave, tilt it forward, and hook slots at back bottom edge onto four
lower tabs of the mounting plate.
2. Rotate the front of the oven up against cabinet bottom.
Figure 1
3. Insert a self aligning screw through top center cabinet hole. Temporarily secure
the oven by turning the screw at least two full turns after the threads have
engaged.
27