Bosch HMV 3051 U Instrucciones De Instalación página 14

Attaching the mounting plate
(no wall studs at corner holes)
14
1. Insert the bolts into the mounting plate through the holes designated.
2. Attach toggle wings from the back of the mounting plate onto each bolt. Leave
enough space for toggle wings to go through the wall and to open.
3. Place the mounting plate against the wall and make sure tabs are touching the
bottom of the cabinet or the level line (see Aligning the mounting plate").
4. Push the bolts through the drywall and finger tighten the bolts to make sure
toggle wings have opened against drywall.