Display Screen - RIDGID SeekTech ST-510 Instrucciones De Funcionamiento

SeekTech
Tools For The Professional
TM
Keypad
Use Up/Down Arrows for
Output Current Adjustment and
Menu Control Keys
(Hold down, use up/down for
contrast adjustment)
Frequency Selection

Display Screen

• Battery Level – Shows remaining battery power in 5 steps.
• Manufacturer – Shows the manufacturer's frequency set being used (default is SeekTech).
• Voltage – Voltage that is applied to the leads. This may say MAX, indicating the voltage is at its highest allowable point
(~80 V peak-to-peak, ~30V RMS (square wave.))
• Current Strength – This is the current flowing through the circuit in milliamps (mA).
• Sound – Indicates if sound is ON or OFF.
• Ohms (resistance) – This shows the approximate resistance in the circuit. See page 9.
• Watts (Power) – Total power that the transmitter is putting out. In Battery Saver mode, this is absent.
• Frequency – Frequency being used.

ST-510
®
Display Screen
Select
Frequencies
128Hz
1kHz
8kHz
33kHz/
93kHz
Voltage
Battery Level
Manufacturer
Frequency
Figure 3: Display Screen
Ridge Tool Company
Inductive Mode
On/Off
Orientation For
Inductive Mode
Main Menu
Sound On/Off
Power On/Off
High Voltage Indicator
Figure 2: Keypad
Watts
Ohms (resistance)
Current Strength
Audio