Ferm HDM1014 Traducción Del Manual Original página 8

accessories must be inserted.
machine:
Remove the cover from the lubrication point
Remove the cap from the lubrication point
using a screwdriver.
Checking and replacing the carbon brushes
The carbon brushes must be checked regularly.
start to run unevenly.
2
Only use the correct type of carbon
a screwdriver.
at the same time.
a screwdriver.
machine run at no load for 15 minutes.
WARRANTY
Consult the enclosed warranty terms.
ENVIRONMENT
Disposal
8
The product, the accessories, and the packaging
must be sorted for environmentally friendly
recycling.
waste. According to the European Guideline
right, power tools that are no longer usable must
be collected separately and disposed of in an
environmentally friendly way.
8
The product and the user manual are subject to
further notice.