Q
Q
Why is there a message permanently on the
screen?
A
Remove it by pressing CALL.
Q
Why are there problems with teletext?
A
Good performance of text depends on a good
strong broadcast signal. This normally requires a
roof or loft aerial. If the Text is unreadable or garbled,
check the aerial. Go to the main index page of the teletext
service and look for the User Guide. This will explain the
basic operation of teletext in some detail. If further
information is needed on how to use text see the teletext
section.
Q
Why are there no teletext sub-pages?
A
There are none broadcast or they have not yet
loaded. Press the
(
X
B
(See teletext section).
Cleaning the screen and cabinet...
Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or
solvents on the screen or cabinet as this may cause damage.
Disposal...
The cold cathode fluorescent lamp in the LCD panel contains a small amount of mercury, when the set reaches the end of its useful
life please dispose of it in accordance with Local Government Regulations or at a recycling centre.
All manuals and user guides at all-guides.com
uestions
and
) button to access.
A
nswers
Q
Why is there no sound from my connected
sound equipment?
A
Check the Speaker option in the Sound menu is
set to Off.
Q
Why are the colours wrong when an NTSC
source is played?
A
Connect the source via a Scart lead and play.
Select Manual setting from the SET UP menu.
EXT3
Store
Set the Colour to Auto. and exit.
1
Go to the Picture menu and adjust the tint.
2
22
continued
Manual setting
Colour system : Auto.
A
V C R
MENU
Back
EXIT
Watch TV