Before connecting any external equipment, turn off all main power switches.
Computer
Connect the PC cable from the computer to the
RGB/PC terminal of the left side of the television.
Press the
B
to select PC mode.
The following signals can be displayed:
VGA: 640 x 480/60 Hz (VESA 480-60)
SVGA: 800 x 600/60 Hz (VESA 600-60)
XGA: 1024 x 768/60 Hz (VESA 768-60)
PLEASE NOTE:
Some PC models cannot be connected to this TV.
An adaptor is not needed for computers with a DOS/V
compatible mini D-sub 15p terminal.
A band may appear at the edges of the screen or parts
of the picture may be obscured. This is due to the
strength of the signal, it is not a malfunction.
When PC mode is selected some of the TV's features will
be unavailable, these will be greyed out on the menu
lists and not selectable, when not in PC mode
PC Setting will be greyed out.
All manuals and user guides at all-guides.com
Connecting a computer
Conversion adaptor if
required (not supplied)
Mini D-sub 15p connector
RGB PC cable
(not supplied)
Signal information for Mini D-sub 15p connector
Pin assignment
for RGB/PC
terminal
Pin. No.
Signal name
1
R
2
G
3
B
4
NC (not connected)
5
NC
6
Ground
7
Ground
8
Ground
7
the left side of your TV
Audio cable for PC to
TV connection
(not supplied)
Pin No.
Signal name
9
NC
10
Ground
11
NC
12
NC
13
H-sync
14
V-sync
15
NC