Alecto BL-329 Modo De Empleo página 33

6. As soon as the batteries are fully charged, the
All manuals and user guides at all-guides.com
BL-329 constantly measures the batteries using
delta-V measurements, the charger switches over to
trickle-charge, the DISCHARGE/CHARGE LED turns
green. The batteries are kept charged in this mode
and are ready for use when needed.
Refresh:
To eliminate the dreaded memory effect found in NiCd
batteries and to assure that your NiCd batteries are
always performing to their full capacity, the BL-329 has
a MEMORY REFRESH function.
1. To activate the MEMORY REFRESH function, simply
set the REFRESH switch in the center position
(Between the 2 and the 4) and place either 2 or 4
batteries in the BL-329. At this point the REFRESH
LED will turn YELLOW.
2. When the REFRESH LED switches off, than you
have to set the switch to either '2' or '4' to auto-
matically start charging the batteries to their fully
charged state.
33