Bose Acoustic Wave II Guía De Usuario página 14

Listening to an External Audio Source
Playing a connected audio source
Figure 9
®
Acoustic Wave II CD
changer sample AUX
display
12
To listen to a connected source:
1. Turn on the external audio device.
2. Press AUX 1-2 on the Acoustic Wave
again to switch between the AUX 1 and AUX 2 inputs. AUX 1 or AUX 2 appears on the
display to confirm your selection (Figure 9).
3. Adjust the volume using the remote control.
Note: The Acoustic Wave ®
on or off, or change its settings or selections.
AUX 1 AUX 2
® II CD changer remote control. Press AUX 1-2
II CD changer remote control cannot turn a connected AUX device
AUX
Play/Pause Stop Next Disc
ON/OFF
Random