Operating Your System; Using The Remote Control - Bose Acoustic Wave II Guía De Usuario

Cambiador de cd

Ocultar thumbs Ver también para Acoustic Wave II:

Guía de usario (85 páginas)

Tabla de contenido

Idiomas disponibles

Using the remote control

Figure 4

Acoustic Wave

II CD

changer remote control

On/Off

Turns the system on or off (page 8).

Selects the CD source in the Acoustic

Wave

music system II (page 9).

Seek/Track

Skips to next/previous CD track

(page 10).

Tune/MP3

Scans forward/backward through a CD

track (page 10).

Throughout this owner's guide, you will see button icons to the left of the operating instructions.

These icons refer to buttons located on the remote control.

The remote control included with your Acoustic Wave

functions of both the CD changer and your Acoustic Wave

only need this remote to control your system. Just aim the remote at the system and press the

buttons. The remote normally works within 20 feet of the front panel.

If the remote stops operating or its range seems reduced, it may be time to replace the !

battery. For instructions, refer to "Replacing the remote control battery" on page 13.

The information in Figure 4 describes the buttons used for playing CDs and selecting auxiliary

inputs. For controlling other functions of the Acoustic Wave

guide that came with it.

Notes:

• Press-and-hold operations require holding the button down for at least one second.

• Pressing FM, AM, CD, or AUX automatically turns on the system to the source selected.

• The remote can select an external audio source that is connected to the changer, but cannot

turn the source on or off or change its settings.

CD Changer

Selects the CD changer and turns

it on if it is off (page 9).