Switching Off The Cooking Areas; Displays: Notes - Errors - Alarms - baraldi Nice 60 Manual

INSTRUCTIONS FOR USE
switches off the cooking area).
By pressing the "
"Booster" (fast boiling) function is activated, indicated by the letter "
on the display.
The "Booster" function increases the cooking area to maximum power
for 10 minutes and then continues automatically on the setting "
2 - touching the "
the setting suggested is "
thesetting from " " to "
2.3 Switching off the cooking areas:
- To switch the individual cooking area, select it and set at "
touch the " " and "
- To switch off all the cooking areas, touch the
2.4

Displays: notes - errors - alarms

•
The " " symbol alternated with the setting selected indicates that there
is no pan on the coking area or the pan is not suitable for induction.
•
The "
maximum power of the hob has already been reached.
•
The " " symbol indicates that the corresponding cooking area is still
hot. If there is a power cut, the "
when power returns. With the "
to switch the cooking area on again.
•
The individual cooking areas can be set only after they have been
selected. The display of the area selected shows a brighter light.
•
The cooking areas have a maximum functioning time according to the
level selected: level from to
hours, level
•
If the "
of the electronic components (if this is repeated after cooling, please
contact the Technical Assistance Service).
30 / GB
" symbol when setting "
" symbol
" symbols.
" symbol indicates that, with the heating areas on, the total
maximum 10 minutes.
" symbol appears, it means there is an anomalous overheating
" and you can now increase or decrease
".
(ON-OFF) symbol.
" symbol goes off but will reappear
" symbol present, it is always possible
maximum 10 hours, level
USE
" is selected, the
".
" or simultaneously
maximum 3
"