Keypad Lock - baraldi Nice 60 Manual

USE
•
If the "
overheated (e.g. due to the presence of an empty pan or metal objects).
•
If the letter "
number or another letter, this means there is a fault (please contact the
Technical Assistance Service).
2.5 Keypad lock
The keypad lock can be activated both with the cooking areas on or when the
hob is off, touching the "
placed above the symbol stays on.
With the cooking areas on, the controls active are "
the hob is off, the only control active is "
" " symbol again for about 2 seconds.
2.6 Timer
The hob is equipped with a "timer" that acts as a cooking programmer for
each cooking zone. It can be set independently for each cooking zone with a
maximum programmable time of 99 minutes and only with the hob activated.
It is possible to program the automatic switch-off of each individual cooking
zone, acting as follows:
• Switch on the cooking zone to be programmed to the desired level.
• Touch the button (2) corresponding to the selected cooking zone. The
display will show "00".
• Act on the symbols
• Once the set time has elapsed, the heating element turns off and an audible
alarm is activated, which can be deactivated by acting on any symbol.
• To program several cooking zones, proceed as above, making sure each
time the lighting of the luminous led relative to the selected zone is switched
on.
" symbol appears, this means that the individual heating area is
" appears on one or more displays alternating with a
" symbol for about 2 seconds. A luminous dot
and
INSTRUCTIONS FOR USE
". To deactivate the lock, touch the
to set the timer.
" and " ", whilst when
31 / GB