Operation; Free; Rfid; Cloud - Gewiss JOINON EASY GW68122 Manual De Uso E Instalación

OPERATION

8.
Depending on the model, there are different ways of accessing the recharging service. The various operating
modes are explained below.

8.1. FREE

AUTOSTART mode indicates that the charging station is always available, without any need for client identification
via RFID cards or an app. The car is simply connected to the station and the recharging session begins automat-
ically. To end the session, just disconnect the car from the station.
It's also possible to select the recharging power by means of the selector in the enclosure compartment.

8.2. RFID

RFID mode indicates that the session has to be activated and terminated using the RFID cards supplied by the
provider and added to the local station White List beforehand.

8.3. CLOUD

CLOUD mode indicates that the charging station is connected to a control and management platform. Thanks to
this platform, the station can be controlled and monitored while it's operating, and the recharging sessions can
be saved. The end user accesses the service via an app or using RFID cards associated with his/her own profile,
in complete autonomy.

STATUS INDICATORS

9.
The charging station uses RGB LEDs to inform the client about the status and indicate which actions need to be
carried out. The meanings of the various colours are explained below:
Colour and status
Fixed green
Flashing green
Fixed blue
Flashing blue
Fixed red
Flashing red
Flashing white
None
Description
The station is ready to start a charging session. No problems detected
This colour is also used to indicate the correct acquisition or deletion of the RFID cards. The fixed
green colour will be visible for 2 seconds, preceded and followed by FLASHING WHITE (RFID card
acquisition) or FLASHING RED (RFID card deletion)
The charging station is waiting for the car to be connected or disconnected.
The charging session is in progress and the car is absorbing energy.
The charging session is in progress, but the car is not absorbing energy (charging terminated, or
car not ready for recharging).
The station has detected an internal error and the charging process cannot be continued
or
The RFID card used is not in the local White List
The station has gone into RFID card deletion mode, to delete the cards from the local White List
The station has gone into RFID card acquisition mode, to save the cards in the local White List
The charging station does not have the necessary power supply
LED
35