Logitech QuickCam Sphere AF Guia Del Usuario página 5

All manuals and user guides at all-guides.com

Using the camera stand
1. Remove the camera from the base.
2. Connect the stand to the base. Carefully use the alignment features to connect the stand easily
to the base.
3. Connect the camera to the stand. Carefully line up the connectors on the stand with the connectors
on the camera.
4. Do not carry the camera by the stand. The base could detach from the stand, and the base
could get damaged if it were to hit the floor. Move the unit by holding on to the base and stand at
the same time.
4 QuickCam Sphere AF
®
Camera bottom Stand top
Line up connectors
Line up connectors
Base top Stand bottom
Correct: Hold base
and stand to move camera.
Incorrect