Access Points; Browser Settings - LG L600V Manual De Usuario

Settings
Move up: Moves the selected network upward.
]
Move down: Moves the selected network
]
downward.

Access points

This menu shows the access point list. You can create
new profiles, delete or edit them by using the Option
Menu. However, you cannot delete or edit default
configurations depending on country variant.
You can edit the following configuration items by
selecting the right soft key, if allowed.
Connection title
Bearer
Authentication
User name
Password
APN
Press Done key to save any configuration changes.
]
90
(Menu #.7.4)
Access Point profile name.
Choose the bearer from the list.
(Default is UMTS.)
Choose the authentication from the list.
(Default is No auth)
Information provided by service provider.
Information provided by service provider.
APN name to access network. Information
provided by service provider.

Browser settings

Profiles
Select the appropriate profile by pressing
This will activate the profile to initiate browser
launch.
Security
If user presses Certificates, certification information
is shown.
User can clear secure session information by pressing
Session clear.
Certificates
If stored, a list of root/ca certificates required for
WTLS/TLS can be found here. Certificates can be
viewed from the list.
Session clear
Secure (WTLS/TLS) session data can be cleared
using this option. Session data should be cleared to
establish a new secure session.
Character encoding
Sets the browser default character set to one of the
following.
(Menu #.7.5)
.