Automatic Cup Tray Light; Built-In Installation - EAS ELECTRIC ECOFFE45 Manual De Instrucciones

Do not use multiple sockets or extensions.
To learn to use the appliance correctly, the first time you
use it follow the detailed instructions in the following
paragraphs.
Important!
the mains power supply in compliance with the installation
regulations in the country concerned.

AUTOMATIC CUP TRAY LIGHT

When the appliance is working, the lights (near coffee
spout) automatically illuminate the spout and cup tray.
Important!
using an optical instrument.

BUILT-IN INSTALLATION

Verify the minimum measure required for correct installa-
tion of the appliance.
The coffee maker must be installed in a column and the
column must be firmly fixed to the wall with commercially
available brackets.
Important:
All installation or maintenance operations must be

performed with the appliance disconnected from the
mains electricity supply.
Kitchen furniture in direct contact with the applian-

ce must be heat resistant (<65ºC).
To guarantee correct ventilation, leave a gap at the

bottom of the cabinet (see measurements in figure).
Safety cut out devices must be included in
Do not look at the lights directly nor
9 V.1