Water Hardness Setting - EAS ELECTRIC ECOFFE45 Manual De Instrucciones

accordingly.
In "READY" state, press Enter to enter "MENU", scroll to
"WATER HARDNESS" and press Enter. Now you can select
between Level 1 and Level 6 according to the strip test level.
The coffee maker will then be programmed to provide the
descale warning when necessary, based on the actual
hardness of the water.
Level PPM CaCo 3
1 Below 50 ppm
2 50 - 120 ppm
3 120-240 ppm
4 240 - 360 ppm
5 Above 360 ppm
SETTING AUTO-OFF TIME
After setting the current time you can also set the
automatic turn off, following the same operation as "AUTO
ON". In "READY" state, press Enter, use "+" to scroll to "AUTO
OFF" and press Enter, then you can select between "30
MINS", "60 MINS" and "90 MINS". Select what you need and
press Enter. After doing this, the appliance can automati-
cally turn off after the set time. To turn the appliance off,
hold the ON/OFF button (B1). The appliance will turn off at
any state.
AUTO OFF
Danger of burns! During rinsing, a little hot water flows
from the coffee spouts. Avoid contact with splashes of
water.
Note: If the appliance is not used for an extended period,
place the main switch on the back of the appliance (A5) in
the O position.
Hardness
Very soft
Soft
Medium hard
Hard water
Very hard
25
WATER HARDNESS
LEVEL 4
60 mins
V.1