Agri-Fab 45-04561 Manual Del Usuario página 8

28. Slide the handle grip (29) onto the end of the handle
29. Assemble the handle tube (9) to the dump tube (5)
and secure in place with a 1/4" x 1" curved head bolt
30. Snap the dump handle clip (33) onto the pivot rod.
29
9
31. To attach the hopper bag to the sweeper, slide the
pivot rod into the pivot rod retainers on the ends of
the bag arm channels. T he channels go on the inside
HINT: Temporarily loosen the plastic wing nuts (31) if
All manuals and user guides at all-guides.com
33
26
24
FIGURE 17
31
FIGURE 18
ATTACHING SWEEPER HITCH T O T RACTOR
1.
2. Set the sweeper height adjustment handle to about
the middle of its adjustment range.
3. Attach the sweeper hitch to the tractor hitch, making
adjustments to the hitch brackets depending on the
drawbar height of your tractor as shown in GROUP A,
APPROXIMATELY LEVEL
(6" to 8" FROM SURFACE)
4. Arrange the spacers into one of the three possible
combinations as shown below in the GROUP A,
IMPORTANT: To obtain the best performance from your
sweeper, arrange the spacers so that the sweeper bag is
GROUP "A" V EHICLES GROUP "B" V EHICLES
WITH HITCHES
HAVING 11" T O 13"
GROUND CLEARANCE. GROUND CLEARANCE.
8
BRUSH HEIGHT ADJUSTED
APPROXIMATELY MID-­WAY
FIGURE 19
GROUP "C" V EHICLES
WITH HITCHES WITH HITCHES
HAVING 9" T O 11" HAVING 7" T O 9"
GROUND CLEARANCE.
FIGURE 20