Troubleshooting - Danby DAR1102WE Guía A Utilizar Y A Cuidar Del Proprietario

Frequently, a problem is minor and a service call may not be necessary, use this troubleshooting
guide for a possible solution. If the unit continues to operate improperly, call an authorized
service depot or Danby's Toll Free Number for assistance.
Difficulty
Does not work
Freezer runs continuously
Internal temperature
not cold enough.
All manuals and user guides at all-guides.com

TROUBLESHOOTING

Possible Cause
No power to unit
Power cord is unplugged.
Wrong voltage is being used.
Temperature too high.
Door is not closed.
Hot food inserted.
Door opened too long or
Close proximity to heat source
No power to unit.
Power cord is unplugged.
Temperature control too low.
Door is not closed.
Hot food inserter
Door opened too long or
Air flow obstruction.
Wrong voltage is being used.
Close proximity to heat source
or direct sunlight.
5
Suggested Solution
Check connection of power cord to
power source.
Plug in unit.
Use proper voltage.
Lower temperature control.
Close door securely.
Be sure that food is at room temperature
before inserting.
Do not keep door open for too long.
too often. Minimize door openings.
Do not place unit close to heat sources
or direct sunlight. or direct sunlight.
Check connection of power cord to
power source.
Plug in unit.
Check setting and increase as neeed.
Close door securely.
Be sure that food is at room temperature.
Do not keep door open for too long.
too often. Minimize door openings.
Allow room for air to circulate around unit.
Use proper voltage.
Do not place unit close to heat sources
or direct sunlight.