Continental AutoLinQ mobile Manual Del Usuario página 82

Pair and connect your smartphone
Pair and connect your smartphone
First phone pairing and connection:
GB
1 2
1. Turn the head unit on (1).
2. Go to the Bluetooth menu of your smartphone and activate the Bluetooth
on your smartphone. (Refer to your smartphone user manual)
3. Launch the device recognition on your smartphone and select in the list
the one named FSDS-XXXX
4. Check the audio source button (2) on the device and apply a short
press if blinking.
5. When asked, enter the validation code 1234 on your smartphone.
6. Apply a short touch the audio source button (2) on the device when
it is blinking.
7. Phone is connected and the system is ready to use when the two vertical
stripes (6) on the docking part are illuminated and have blinked shortly.
Note:
Device only recognize short touch on the source button (2) during phone
pairing procedure. If a long touch was made it will lead to a pairing problem
and you just have to restart paring procedure at point 3.
Conti_AutolinQ_A5_DE_ES_FR_GB.indd 82
All manuals and user guides at all-guides.com
6
82
10.07.2014 09:22:46