Continental AutoLinQ mobile Manual Del Usuario página 83

Phone Re-connection (phone previously paired)
Phone Re-connection (phone previously paired):
Last phone connected will be recognized and reconnected automatically
when turning on the device (make sure the Bluetooth is activated on your
smartphone). After a moment (max. 20 sec.) the stripes on the docking part
will illuminate and then blink shortly meaning that the system is connected
and ready.
When the phone to be used is not the last connected one:
1. Go to the Bluetooth menu of the phone
2. Select the device named FSDS-XXXX from the list of paired deviced
3. Phone is connected and the system is ready to use when the two vertical
stripes (6) on the docking part are illuminated and have blinked shortly
Change phone connected:
Only one phone can be connected to the system at the same time.
1. Disconnect the phone already connected by turning off the Bluetooth
of this phone. The illumination of the vertical stripes (6) will turn off.
2. On the new phone, go to the Bluetooth menu and select the device named
FSDS-XXXX from the list of paired devices and start the connection process
Notice!
Continental does not guarantee compatibility with all smartphone and old
versions of operating systems. Bluetooth system operation may vary and
Continental does not guarantee sequence of pairing procedure.
Conti_AutolinQ_A5_DE_ES_FR_GB.indd 83
All manuals and user guides at all-guides.com
83
GB
10.07.2014 09:22:46