Description Of Display Symbols; Troubleshooting; Care And Maintenance - MABIS Healthcare 04-180-001 Manual De Instrucciones

Description of Display Symbols

SYMBOL CONDITION
Appears when pulse reading
is displayed.
Appears when recalling a
measurement from memory.
Appears when battery
voltage is excessively low.
Appears when manual cuff
inflation is needed.
Appears when manual cuff
deflation is needed.
Appears when measurement
cannot be obtained.
14
All manuals and user guides at all-guides.com
If any abnormality occurs during use, please check and correct the
following:
ACTION
Condition
Display is blank when power is on.
Record pulse reading.
Measurement incomplete or
abnormally low or high values
Memory recall function
displayed.
in progress.
Measurements are different from
those typically measured by
Replace batteries with
new ones.
physician or every measurement
reading is different.
Measurement in
progress.
Measurement in
1. Disconnect the cuff tubing from the monitor prior to storing.
progress.
2. Only use a soft, dry cloth to clean your blood pressure monitor.
3. Avoid using any types of liquids on the monitor or cuff.
Wait a minimum of 15
4. Do not store the unit where it will be exposed to direct sunlight, dust or
minutes and remeasure.
Loosen cuff to allow
5. Avoid extreme temperatures.
blood circulation in the
arm.
6. Never disassemble the monitor or cuff.
7. Dropping or subjecting your blood pressure monitor to strong shocks

Troubleshooting

Care and Maintenance

humidity.
should be avoided.
Correction
Check and correct the polarity of
the installed batteries. Reinstall or
replace batteries.
Review and follow 'Applying Your
Blood Pressure Cuff' and 'Taking
Your Blood Pressure Reading'
sections. Replace the batteries.
Remember, blood pressure
readings are influenced by physical
and mental conditions and/or even
the time of day. Daily measurement
recordings should be interpreted
by your physician.
15