Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there is
still a slight risk of accident or injury when using the
device. Stay alert and use common sense when using
the device.
3. USE GUIDELINES
The device is intended solely for the storage of wine.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
7
1
2
3 4
5
6
1.
Housing
2.
Shelves for beverages
3.
Adjustable foot
4.
Additional door bracket
5.
Crossbar to secure the bottles
6.
Door with a display window
7.
Door hinge
3.2. PREPARING FOR USE
APPLIANCE LOCATION
The ambient temperature should not exceed the range of
5-32°C and the relative humidity should not exceed 85%.
Ensure good ventilation in the room in which the device
is being used. Keep a minimum distance of approx. 13 cm
from the rear and side walls of the device. The device should
always be used when positioned on an even, stable, clean,
fireproof and dry surface, and be out of the reach of children
and persons with limited mental and sensory functions.
Position the device such that you always have access to the
power plug. The power cord connected to the appliance
must be properly grounded and correspond to the technical
details on the product label. Level the device using the
adjustable feet. Before the first use, remove and wash all
accessories; wash the device inside and dry it thoroughly.
ASSEMBLING THE APPLIANCE
After transporting the device, do not turn it on for approx.
8 hours before connecting it to the power source - the
refrigerant must be evenly distributed around the system to
prevent possible failure of the cooling system as the result
of the device being tilted from the vertical axis beyond 45°.
10
3.3. DEVICE USE
3.3.1 THE CONTROL PANEL
The control panel is located at the front, in the upper part of
the device; it is accessible when the door is opened.
A
B
C
D
E
A.
the device on/off button (press and hold for 5 seconds
to turn the device on or off)
PLEASE NOTE: when first switched on, the compressor
in the appliance may run continuously, and the
cooler inside may give off an unpleasant smell. This
is normal and is not a defect of the device! Over
time, the unpleasant smell should disappear, and
when the device desired temperature is reached,
the compressor will turn off. During this time, avoid
opening the cooler door frequently or placing bottles
inside.
IMPORTANT: after switching the device off or
disconnecting it from the power source, wait at least 5
minutes before reconnecting or switching it on.
B.
On/off button, cooler interior light and temperature
unit change (press to turn on or off the light; press and
hold for 5 seconds to change the temperature units
from Celsius to Fahrenheit - oC/oF - the selection of
the appropriate unit will be highlighted on the right
hand side of the temperature display )
C.
display the current temperature value in the cooler
D/E. increase/decrease
the
temperature
within
available range (pressing the button once shows
the currently set temperature, and pressing it again
increases/decreases the value of the set temperature
by 1 degree each time)
PLEASE NOTE: to view the desired temperature, press
the button D or E, and the required temperature value
will be displayed for approx. 5 seconds)
3.3.2. SUGGESTIONS FOR OPTIMAL USE
•
Grill shelves (trays) for beverage bottles are adapted
to store standard wine bottles, i.e. 0.75 L, and it is on
this this basis that the maximum number of stored
bottles has been calculated, although larger bottles
can also be stored in the cooler.
6
11
5
8
5
6
3
3
Rev. 01.12.2020
•
For the safety of the user and to secure the stored
beverages, the grid shelves (trays) have been designed
in such a way that they cannot be removed in full,
when the bottles are stacked. For optimal access, just
slide the appropriate tray out to 1/3 of its length.
•
Adding several bottles at once will take more time to
cool than when the bottles are added individually.
•
Make sure that the cooler door is tightly closed and
that nothing prevents it from closing (e.g. insufficiently
inserted shelf).
•
Wine stored at higher temperatures ages faster and
may lose flavour and aroma. On the other hand, if
the storage temperature is too low, it may cause the
accumulation of harmful deposits inside the bottles.
Exposing the wine to light, vibrations, or fluctuations
in temperature or humidity harms its taste, bouquet of
aromas and may lead to spoilage. The ideal humidity
for wine storage is 60-70%, while the temperature
depends on the type of wine:
Type of wine
red
white
sparkling/champagne
rosé
mature/good vintage
•
When the bottle is opened, the wine comes into
the
contact with air, so store the opened bottle in such
a position that the smallest possible surface of the
wine comes into contact with the air. After opening
the bottle, the wine, it is suitable for consumption for
2 more days for delicate white wines or 3 for red wines
with a strong, rich taste.
Under appropriate conditions, the storage and
maturation time of unopened wine is:
Up to 2 years for white wines
Up to 10 years for full-bodied dry red wines
Up to 20 years for dessert wines
3.4. CLEANING AND MAINTENANCE
a)
Unplug the mains plug and allow the device to cool
completely before each cleaning, adjustment or
replacement of accessories, or if the device is not
being used. Wait for the rotating elements to stop.
b)
Use only non-corrosive cleaners to clean the surface.
c)
Use only mild, food-safe detergents to wash the
device.
d)
After cleaning the device, all parts should be dried
completely before using it again.
e)
Store the unit in a dry, cool place, free from moisture
and direct exposure to sunlight.
f)
Do not spray the device with a water jet or submerge
it in water.
g)
Do not allow water to get inside the device through
vents in the housing of the device.
h)
Clean the vents with a brush and compressed air.
i)
Use a soft, damp cloth for cleaning.
j)
Do not use sharp and/or metal objects for cleaning
(e.g. a wire brush or a metal spatula) because they
may damage the surface material of the appliance.
Rev. 01.12.2020
k)
Do not clean the device with an acidic substance,
agents of medical purposes, thinners, fuel, oils or
other chemical substances because it may damage
the device.
l)
If the device is not used for a period longer than 3
weeks, empty it of its contents, turn it off, disconnect
the cable from the power source and leave the
door slightly open to prevent the accumulation of
moisture, mould and unpleasant odours.
DISPOSING OF USED DEVICES
Do not dispose of this device in municipal waste systems.
Hand it over to an electric and electrical device recycling
and collection point. Check the symbol on the product,
instruction manual and packaging. The plastics used to
construct the device can be recycled in accordance with their
markings. By choosing to recycle you are making a significant
contribution to the protection of our environment. Contact
local authorities for information on your local recycling
facility.
Storage temperature (°C)
15.5 – 18.5
10 - 15
7.2 – 9.5
9.5 – 10.5
13
EN
11
Publicidad
Tabla de contenido
