Table of Contents
Assembly . . . . . . . . . . . . . . . . . . 4
Safety Precautions
WARNING
Before using a power tool with this product, read and follow the tool manufacturer's
instructions and safety precautions in addition to the safety precautions below to reduce the risk
of serious injury from hazards such as fire, electric shock, or rotating drill bit.
■
Always follow the written safety instructions for using your jig.
■
Follow your drill manufacturer's safety guidelines.
■
Always wear personal protective equipment certified as such, including safety glasses,
hearing and respiratory protection. When using a power tool, always follow the manufacturer's
personal protective equipment requirements.
■
Do not allow familiarity gained from frequent use of your tools to replace safe work practices.
A moment of carelessness is sufficient to cause severe injury.
WARNING
Follow your clamp manufacturer's safety guidelines. Ensure that the jig is clamped
securely prior to hanging the cabinet door.
WARNING
Do not exceed the rated weight limit capacity of the jig. Exceeding the weight limit
with doors over 25 lbs. may cause the product to fail which can result in serious injury.
WARNING
When mounting doors, take special care to avoid injury. Ensure the cabinet door is
properly placed on the jig and supported with one hand.
WARNING
Avoid awkward hand positions where a sudden slip could cause contact with the
rotating bit.
WARNING
Do not operate this tool or any machinery while under the influence of drugs, alcohol,
or medications.
WARNING
This product can expose you to chemicals including Carbon 1333-86-4 and other
chemicals, which are known to the State of California to cause cancer and reproductive harm.
For more information go to www.P65Warnings.ca.gov.
2
Operation . . . . . . . . . . . . . . . . . . 8