Kreg KHI-CDIJ Manual Del Propietário página 5

b. Insert the pegs (1) of the support arm (D) into the correct jig setting (see chart on page 6).
c. Slide the support arm (D) horizontally to secure in place.
1
Note To remove the support arm, slide horizontally and pull away from the jig. Flip the support
arm and reattach to the same jig setting for the opposite door.
2
Optional: Add Shims to the Support Arm
Depending on how far you want to the door to overlay the opening, you can use the support arm
alone, or add one or both shims. Use the chart on page 6 to determine which shims to use.
a. Apply the shim (A or B) to the end of the support arm.
Note To remove, pull the shim(s) off the end of the support arm.
A B
C
D
A
B
5