Allen-Bradley PanelView Plus Serie Instrucciones De Instalación página 11

All manuals and user guides at all-guides.com
PanelView Plus/VersaView CE Terminals and Display Modules
3. If using keypad legend strips on keypad terminals, we recommend that you
install the strips before installing the terminal. Be careful not to pinch legend
strip during installation.
4. Place the terminal in the panel cutout.
5. Install the mounting clips. The ends of the clips slide into the slots on the
terminal.
Mounting Clip
Mounting Clip Slot
6. Tighten the mounting clip screws by hand until the gasket seal contacts the
mounting surface uniformly.
Sealing Gasket
Publication 2711P-IN001B-MU-P
11