Harbor Breeze CHA52BNK5LR Manual página 6

INITIAL INSTALLATION
2. Determine mounting method to use.
A. Downrod mount (standard or angled ceiling).
B. Closemount (standard ceiling only).
IMPORTANT: If using the angle mount, check to
make sure the ceiling angle is not steeper than 19°.
*Helpful Hint: Downrod-style mounting is best
suited for ceilings 8 ft. or higher. For taller ceilings
you may want to use a longer downrod (not
included). Angle-style mounting is best suited for
angled or vaulted ceilings. A longer downrod is
sometimes necessary to ensure proper blade
clearance. Closemount mounting is more suitable
for ceilings lower than 8 ft. high.
3.
Check to make sure blades (J) will be at least
30 in. from any obstruction and at least 7 ft.
above the floor.
4. Temporarily raise canopy (B) to mounting
bracket (C) and determine which 2 canopy
mounting screws (G) align with slotted holes in
canopy (B). Partially loosen these 2 canopy
mounting screws (G) and remove the other two;
save for later use.
2
3
J
4
6
19° max.
A
B
7 ft.
min.
C
G
B
30 in.
min.
G