Installation; Module Slot - Miele XKM 3200 WL LMD Instrucciones De Manejo

en - Fitting and installation

Module slot

46

Installation

 Before fitting the communication module compare the connec-
tion data (voltage and frequency) on the data plate with that on the
data plate of your cleaning machine. If the data does not match,
the module could sustain damage. If in any doubt, consult a quali-
fied electrician.
Disconnect the cleaning machine from the mains electricity supply.

The module is inserted into the module slot on the cleaning machine.
The module slot is located on the back of the cleaning machine.
- If the cleaning machine is installed in a niche:
Pull the cleaning machine forwards out of the niche.

- If the cleaning machine is installed under a worktop:
Open the door.

Unscrew the fixing screws.

Pull the cleaning machine out from under the worktop. Take care

not to damage the hoses and cables when moving the machine.