NuWave OXYPURE ZERO Manual Del Propietário página 14

INSTRUCTIONS
Auto Mode
Auto mode allows you to run the unit automatically at the lowest fan speed
until the unit detects a drop in the air quality, causing it to go to the highest
fan speed until air quality improves.
1. Press AUTO, and the Power and Auto back lights will turn on.
2. The unit will automatically go into Auto mode. There is no time limit on
Auto mode.
Note: The AUTO and FAN SPEED buttons cannot work together. While in
Auto mode, if you press FAN SPEED, Auto mode will turn off, replaced by
Manual Fan Speed mode. While the unit is running in Auto mode, the user
can adjust the working time by pressing TIMER. While Manual Fan Speed is
engaged, if you press AUTO, the unit will go into Auto mode and remain in
Auto mode until changed.
Ultimate Clean Mode
When in Ultimate Clean mode, the OxyPure
fan speed based on your air quality and run as long as is necessary to
clean the air.
1. Press ULTIMATE CLEAN. The LEDs around the ULTIMATE CLEAN button
will be lit green.
2. Press ULTIMATE CLEAN again to turn it off.
Note: The ULTIMATE CLEAN and FAN SPEED buttons cannot work
together While in Ultimate Clean mode, if you press FAN SPEED, Ultimate
Clean mode will turn off, replaced by Manual Fan Speed mode. While the
unit is running in Ultimate Clean mode, the user can adjust the working
time by pressing TIMER. While Manual Fan Speed is engaged, if you press
Ultimate Clean, the unit will go into Ultimate Clean mode and remain in
Ultimate Clean mode until changed.
ECO Mode
ECO mode allows you to save energy and money by turning the OxyPure off
when it is not needed. Press POWER and then press and hold AUTO for 1
second. The unit will then go into Eco mode. The LED light above Eco Mode
will be green.
• When the air quality is poor, the fan will automatically run.
• When the air quality is good, the fan will turn off.
To run both Eco and Ultimate Clean or AUTO modes together, press
ULTIMATE CLEAN or AUTO while Eco Mode is activated. The timer in
Ultimate Clean is adjustable by pressing TIMER until the desired time is
selected. The OxyPure
time is finished, after which it will return back to just Eco Mode.
14
instructions
will run in Eco Mode and Ultimate Clean until the
®
will automatically adjust the
®