Error Table - Monty E132 Manual

DISPLAY LED
PARTS
1. Battery level indicator. Each led indicates 25% of the total capacity.
2. Pedal assist level indicator. 3 levels + Without assistance (0).
3. On-Off button.
4. Higher level of pedal assist program button.
5. Lower level of pedal assist program button.
* Keeping it pressed: auto mode 6km/h "Walk Assist"
INSTRUCTIONS
1. Press the On-Off button to turn on the power.
2. Control panel will turn on.
3. Press again the On-Off button in order to turn it off.

ERROR TABLE

LIGHT COMBINATION
ATTENTION: The display will shut down after one minute whith an error code.
2
ERROR
Current error
Display error
Motor error
Motor communication error
Brake error
Communication error
1
3
4
5*
Inspect if motor phrases short-circuits
Inspect if the display is well connected
Inspect if motor phrase is well connected, inspect connexions
with controller.
Inspect motor and its cables
Inspect if brakes are activated, check brake connexions
Inspect connexions between display and controller
SOLUTION