Malfunction Analysis - ProKlima GPC12AJ Manual

Malfunction analysis

Please check below items before asking for maintenance. If the malfunction still
can't be eliminated, please contact local dealer or qualified professionals.
Phenomenon
● Power failure?
● Is plug loose?
● Whether the air switch is trip-
Air conditioner
can't operate
● Is there's malfunction for the
● Whether the unit is restarted up
● Is the power too low?
● Whether the air filter is too dirty?
Poor cooling
● Whether the set temperature is
(heating)
● Whether door and window are
● Whether the unit is interfered
● Whether remote controller is
Air conditioner
can't receive
signal from
● Whether it's blocked by obst-
remote contr-
oller or remote
● Is sensitivity of remote contr-
controller is
not sensible.
● Whether there's fluorescence
Troubleshooting
ped off or fuse is burnt?
circuit?
after stopping immediately?
proper?
closed?
seriously (such as static pres-
sure, unstable voltage)?
within the receiving range?
acles?
oller low?
lamp in the room?
● Wait after power recovery.
● Reinsert the plug.
● Ask professional person to
replace air switch or fuse.
● Ask professional person to
replace circuit.
● Wait for 3min, and then turn
on the unit again.
● Wait after voltage is resumed.
● Clean the air filter.
● Adjust the temperature.
● Close door and window.
● Please pull out the plug. Ins-
ert the plug after about 3min,
and then turn on the unit.
● The receiving range of remote
controller is 8m. Do not exce-
ed this range.
● Remove the obstacles.
● Check the batteries of remote
controller. If the power is low,
please replace the batteries.
● Move the remote controller
close to air conditioner.
● Turn off the fluorescence lamp
and try it again.
61
Solution