ProKlima GPC12AJ Manual página 75

Installation instructions
clasp
Install rear clip — aim the rear clip(upper) at the
rear clip(lower), fix them together, press the clasp
forcibly in to the groove.
hose
rear clip
Install the hose at the rear clip — aim the opening
of hose at the round mouth of rear clip, rotate the
hose anticlockwise into the rear clip.
joint 1
hose
Install the hose at the joint 1 — aim the opening
of hose at the round mouth of joint 1, rotate the
hose anticlockwise into the joint 1.
sliding groove of rear plate
Connect rear plate 1 and rear plate 2 — fix the
adjustable plate
screw
adjustable plate at the sliding groove of rear
plate 1, put the adjustable plate into the rear plate
to enable the adjustable plate slide inside the rear
plate, then connect the rear plate 2 and fix the
rear plate 1 and 2 with screw. Adjust the distance
between rear plate 1 and rear plate 2 according to
the required installation height.
73