User Instructions - Kitchen Living HM925 Manual Del Usuario

4 Qt. Stand Mixer _______

USER INSTRUCTIONS

HOW TO USE THE STAND MIXER AND HAND HELD UNIT
1.
When Assembling the Stand Mixer, take the hand held unit and align the 2 front holes
with the 2 protrusions on the top of the base. Press down gently until you hear a click
that indicates the hand held unit is secure. Try lifting the hand held unit. If it does not
move then it is secure. If it moves repeat the steps above. Push the grey button on the
side of the base to tilt the head back to receive the attachments.
2.
Please note the hand held unit can be used by itself without the base.
3.
Please note the beaters will be off center of the bowl.
4.
Select the attachments that are appropriate for the food that is going to be mixed.
5.
Please note: The dough hooks are for mixing dough only and should not be used for
other items such as beating eggs, cake mixes, or cookies.
6.
Please note that the beaters can be inserted in either hole but the dough hooks
should only be inserted one way. The dough hook that has the washer on it (see
image on next page) must go in the larger of the 2 holes. If you put the dough hooks in
the wrong way they will not click into place. The Stand Mixer will operate if the dough
hooks are inserted incorrectly but you will not get proper kneading action and you could
risk ruining a recipe or damaging your mixer.
7.
Make sure the speed button is on "O" before you plug the unit into a power outlet.
8.
Turn the speed button to the desired speed and the Stand Mixer will begin working.
9.
If you press the "Turbo" button it will increase the speed approximately 15%.
10.
Do not stick knives, metal spoons, forks or other utensils into the bowl while it is
operating.
11.
Use a rubber spatula to scrape down the sides of the bowl when needed.
12.
Please note the bowl will not turn automatically, however it can be turned easily
manually.
13.
It is recommended that you do not leave the Stand Mixer on for more than 5 minutes at
a time. Turn the Stand Mixer off to scrape the sides before turning it back on.
14.
When kneading yeast dough the speed button should be set on 1 or 2.
15.
When mixing is complete, turn the speed button to "0" and unplug the unit from the
power supply.
16.
Press the Tilt Head button to tilt the beaters out of the bowl. Use a rubber scraper to
clean off the beaters if necessary.
17.
Remove the bowl from the stand.
18.
To remove the beaters, make sure the unit is off and the speed button is set on "0".
Press down on the speed button to eject the beaters.
WARNINGS
DO NOT press the eject button when the Stand Mixer is running.
ALWAYS keep fingers and utensils out of the Stand Mixer when it is running or
plugged in.
ALWAYS make sure that the Stand Mixer is unplugged from the power outlet when
not in use.
AFTER SALES SUPPORT
888-367-7373
All manuals and user guides at all-guides.com
___ ____________ _ ____USER INSTRUCTIONS
customer-service@wk-usa.com
7