Samoa 363 053 Guía De Servicio Técnico Y Recambio página 2

EN
INTRODUCTION
!
IMPORTANT: Read all the instructions in this manual prior to use. Save these instructions.
· Only use the unit for the purposes for which is intended.
· Do not alter or modify the unit.
· Do not exceed the maximum working pressure or temperature. See page of technical specifications.
· Do not point dispense valve at anyone or at any part of the body. Use the equipment with fluids which are
compatible with the moist parts of the equipment. See the relevant section of technical specifications.
· Observe the manufacturer´s safety warnings for the fluids used.
!
WARNING: Relieve all pressure in the system before any installation or maintenance operation on the equipment.
DESCRIPTION
The control valve has been designed to dispense a variety of fluids. These include engine oils, hydraulic oils and
antifreeze fluid.
The balanced control valve allows a progressive opening for better control of fluid delivery. The valve can be locked in
open position by means of the trigger button.
The control valve includes a trigger guard to prevent accidental opening.
Refer to operation section for details of operation.
All control valve models include a threaded swivel, a nozzle extension outlet and an easy replacement strainer.
Depending on control valve configuration, are available the following models:
3/4" BSP
1" BSP
PART NO.
363 053
363 055
363 054
363 056
2
836 837 R. 09/20
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
DESCRIPTION
High volume control valve with 3/4" BSP threaded inlet, 30º rigid curved extension and a
semiautomatic non-drip tip.
High volume control valve with 1" BSP threaded inlet, 30º rigid curved extension and a
semiautomatic non-drip tip.
High volume control valve with 3/4" BSP threaded inlet, flexible straight extension and a
semiautomatic non-drip tip.
High volume control valve with 1" BSP threaded inlet, flexible straight extension and a
semiautomatic non-drip tip.
369236
369237