OPERATING ISSUE
Vacuum will not start.
Vacuum has poor suction.
Brush does not rotate.
Vacuum has burning smell.
Dust is leaking out of vacuum.
PAGE 7 OF 21
TROUBLESHOOTING
CAUSES
Battery is discharged.
Belt is worn or broken.
Filter bag is full.
Air path is blocked.
Broken or worn belt.
Obstruction.
Something may be caught in the
brushroll.
Belt is worn or broken.
Filter bag is not properly seated.
1-800-295-5510
uline.com
RECOMMENDATIONS
Check battery life display.
Charge the battery. (See Page 3)
Replace belt. (See Page 6)
Replace the filter bag. (See Page 5)
Remove debris from air path. Check the
brush roll for clogs. Remove the filter bag
from the vacuum intake and check for
debris.
Replace belt. (See Page 6)
Remove debris from air path. Check the
brush roll for clogs. Remove the filter bag
from the vacuum intake and check for
debris.
Remove debris from air path. Check the
brush roll for clogs. Remove the filter bag
from the vacuum intake and check for
debris.
Replace belt. (See Page 6)
Ensure filter bag is properly installed.
(See Page 5)
0122 IH-9934