Labelmate CAT-3 Manual Del Usuario página 4

About your rewinder
LABELMATE
"CAT" (Constant Adjustable Torque™) has made these quiet, easy-to-use rewinders the industry standard.
With various core sizes, label widths, roll diameters and options to choose from, there is a rewinder to fit any job you may
have.
FEATURES
• Settings for Torque/speed and direction via the Control Panel
• CAT-3 with custom build heavy-duty & silent motor. Max. Speed: 125 CM/SEC at the beginning of a 76 mm core roll
• The CAT-3-Standard has a vane-style core Holder (FIG.1)
• The CAT-3-ACH (FIG.3) employs an adjustable core holder enabling the use of varying core sizes, for maximum flexi-
bility
• The CAT-3-CHUCK (FIG.2) includes a quick-locking "Quick-Chuck" core chuck permitting the fastest loading and un-
loading of cores and label rolls
• CHUCK/STANDARD/10-INCHES models come standard for using cores in 76mm. On request available in
38/40/44/50/70/100 mm.
P/N MODEL
LMR004 CAT-3-STANDARD
LMR005 CAT-3-ACH
LMR006 CAT-3-CHUCK
LMR007 CAT-3-10-INCHES
LMR008 CAT-3-1-INCH
GENERAL CONTENT OF THE PACKAGING
• User Manual (this document)
• Label Rewinder Unit
• Power Supply Module
• LABELMATE "Quick-Chuck" ™ Quick-Locking Core Chuck or Standard Shaft with three (3) metal Vanes installed, or
Model-10-INCHES Shaft with six (6) metal Vanes installed, or Model –ACH: Adjustable Core Holder
• Two 300mm Plastic Flange Plates (One only for QC, none for ACH)
• Retain the Shipping Container and Packaging for Storage and Transport
GENERAL
• Power Supply: 100-240VAC- 50Hz., Output 15VDC- 4.33A
• Limited Warranty of 5 Years, 1 Year on the Power Supply
• Weight: 9.6 KG to 11.1 KG depending configuration
Labelmate - The World's Leading Manufacturer of Label Dispensers, Rewinders, Unwinders, Slitters & Counting Solutions
CAT-3 MODELS
DESCRIPTION
Standard for 76mm cores
(38/40/44/50/70/100mm available)
Size W x D x H:300 x 350 x 320 mm
Adjustable Core Holder for using any
core diameter between 25 & 101 mm
Size W x D x H:280 x 310 x 310 mm
Easy-Loading Quick-Chuck for 76mm
cores (38/40/44/70/100mm available)
Size W x D x H:300 x 385 x 320 mm
Standard for 76mm cores
(38/40/44/50/70mm available)
Size W x D x H:300 x 455 x 320 mm
For 25,4mm cores
W x D x H:220 x 350 x 280 mm
MAX LABEL MAX ROLL
WIDTH DIAM
155 mm 300 mm
155 mm 280 mm
170 mm
(optional 220 300 mm
& 270)
255 mm 300 mm
Size
155 mm 220 mm
MAX
WEIGHT
8 KG
7 KG
10 KG
10 KG
8 KG