Adjusting Your Setup
Menu category
Menu item
Color System
Menu Function
Initial Setup
Auto Shutoff
Timer/Clock
Model Name
Serial Number
Temperature
Unit Status
Fan
50
(US)
Setting option
Select when the picture from a VCR of other television system is not very good. You can
adjust the setting only when the VIDEO input is selected.
Select how the MENU button on the remote functions.
On/Off: If the MENU button is pressed, the menu screen appears. If the button is pressed
again, the menu screen disappears. (factory setting)
Return: If the MENU button is pressed, the menu screen appears. If the button is pressed
while the menu screen appears, the menu returns to the previous screen. Some
menu operation changes.
Select to set the TV to change to the standby mode automatically if there is no broadcast
or input signal through the connected equipment.
Off: "Auto Shutoff" does not function.
5min: Changes to the standby mode after 5 minutes if there is no broadcast or input
signal.
10min: Changes to the standby mode after 10 minutes if there is no broadcast or input
signal.
Model name of this TV.
Serial number allocated for each TV
If "NG" flashes, follow the procedure in "Self-diagnosis function" (See page 55).
If "NG" flashes, follow the procedure in "Self-diagnosis function" (See page 55).