Crossover & Wiring Configuration - Kicker KSMT25 Manual Del Propietário

Crossover & Wiring Configuration
We recommend using 16 gauge (or larger) wire. The
KSMT25 Dual Pods are rated at 4 ohms and work
with any source unit or amplifier designed to operate
at a 4 ohm load. Make sure your source unit or
amplifier is rated for 4 ohm operation.
1. Connect the crossover terminals and receptacles
to their respective mated connector on the KSMT25
pod assembly. The terminals on the KSMT25
crossover are all different sizes and types to prevent
incorrect connection. The crossover wire colors
match the pod assembly wire colors.
2. Slide the clear cover over the terminals to prevent a
short circuit.
3. Connect the crossover input to the outputs of
the head unit or amplifier using the supplied butt
connectors. The positive lead is the wire with gray
insulation labeled with a "plus" symbol. The negative
lead has gray insulation with a black stripe on it.
English
Outputs
Black - Tweeter Positive
Black/White - Tweeter Negative
Gray - Midrange Positive
Gray/Black - Midrange Negative
Inputs (from amplifier)
Gray - Positive
Gray/Black - Negative
11