Installation Procedure; Securing The Cooktop In The Countertop; Electrical Connection; Electrical Requirements - Bosch NEM5466UC Instrucciones De Instalación

Ocultar thumbs Ver también para NEM5466UC:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

en-us Installation procedure
4 Installation procedure

Installation procedure

Follow these instructions to install the cooktop into the
Installation procedure
countertop.
CAUTION
Sharp edges.
Use protective gloves when installing the appliance.
CAUTION
The appliance is heavy.
It is recommended that two people install this appliance.
6
4.1 Securing the cooktop in the countertop
The cooktop should be secured to the countertop using
the brackets provided.
Attach the brackets to the corresponding slots on the
1.
underside of the cooktop.
Place the cooktop into the countertop cutout.
2.
Insert the clamping screws into the bracket and secure
3.
the cooktop to the countertop. Protect delicate counter-
tops by placing a wooden disk underneath.
5 Electrical connection

Electrical connection

Read these instructions to safely connect your appliance
Electrical connection
to the electrical supply.
5.1 Electrical requirements
Ensure that the following general requirements are met.
¡ You can find the rating plate with the electrical specifi-
cations on the underside of the appliance.
→  "Rating plate location", Page 8
¡ The junction box must be located within 3 feet of the
cooktop connection. It should be easily accessible for
service purposes.

Publicidad

Tabla de contenido
loading

Tabla de contenido