Settings And Viewing The Setpoint - Hayward S.Line Pro Fi Manual De Instalación E Instrucciones

4. USER INTERFACE (continued)

4.8 Settings and viewing the setpoint

Desired water temperature
The setpoint can be changed either in OFF or in ON mode with an accuracy
of 0.5°C.
• Press or
• Press or
• Press to confirm or
The settings are saved automatically after 5 seconds of inactivity.
It is recommended to never exceed 30°C to avoid alteration of the liners.
20
to make the setpoint blink.
to set the desired setpoint.
to cancel.