Personal Protective Equipment (Ppe); General Symbols; Danger Zone; Target Group - Hymer 21000008 Instrucciones De Funcionamiento Originales

1.2.2 Personal protective equipment (PPE)

Use fall protection
Failure to use the required fall
protection equipment can result in
injury or death.

1.2.3 General symbols

Use handrails
Use handrails when climbing the
stairs.

1.3 Danger zone

The danger zone refers to the immediate area
around the product where personnel are at risk of
being hit by falling objects. It extends approx. 2 m
around the entire product.

1.4 Target group

This document is aimed at the following target
groups:
Target group Explanation
Operator
User
Builder
Maintenance
staff

1.5 Intended use

The product is intended for the following use:
For use as a work and maintenance platform
ȫ
to access worksites not exceeding a certain
height.
For permanent indoor use (mobile products).
ȫ
For providing access to machinery.
ȫ

1.6 Improper use

Any use that is not described in or goes beyond
the scope of the "Intended use" section is
considered improper. The operator bears the sole
risk for any damage resulting from improper use.
In particular, the following use of the product is
prohibited:
As a means to climb over to machinery and
ȫ
buildings.
As a base for other access equipment or as
ȫ
a means to perform work that exceeds the
specified maximum height.
04 Original HYMER instructions for use | BA article no.: 21000008
Person responsible for the
technical maintenance of the
product
Person who uses and operates
the product
Person who assembles the
product
Person who maintains and
services the product
As an attachment point for hoists or other
ȫ
similar lifting equipment.
As a means of transporting tools and materials.
ȫ
As a means of transporting people.
ȫ
As a piece of equipment used for demolition
ȫ
work (due to vibrations).
As a piece of sports equipment.
ȫ
Using a vehicle to tow the product.
ȫ
For permanent outdoor use (including
ȫ
overnight and at the end of a shift)

2 SAFETY INSTRUCTIONS

Observe the following safety instructions to
ensure the safety of personnel.

2.1 Qualification of personnel

Operators are allowed to put the product to use
ȫ
only if they have been instructed accordingly.
Users are allowed to use and operate the
ȫ
product only if they have been instructed
accordingly.
Assembly, commissioning, functional
ȫ
checks, maintenance, troubleshooting,
decommissioning and dismantling must always
be performed by persons, qualified personnel
and experts who have been authorised by the
operator.
The operator is responsible for ensuring the
ȫ
product is operated safely.
The product is not intended for use by persons
ȫ
with limited physical, sensory or mental
capacity or a lack of experience and/or a lack
of knowledge, unless they are supervised by
a person responsible for their safety or have
received instructions from such a person on
how to use the product.

2.2 Safe use

2.2.1 Operators

Observe the conditions specified by
ȫ
the manufacturer regarding operation,
maintenance, troubleshooting,
decommissioning and maintenance.
Have the product regularly inspected by a
ȫ
service technician authorised by the operator
in order to ensure it is safe to use.
Do not make any modifications to the product
ȫ
without the manufacturer's approval.
Assembly, commissioning, operation,
ȫ
maintenance, servicing work, troubleshooting,
decommissioning and dismantling must always
be performed by qualified personnel who have
been authorised by the operator.
As required by the German Social Accident
ȫ
Insurance (DGUV), the product must be