Cleaning & Maintenance - Venta ORIGINAL CONNECT Serie Manual De Instrucciones

CLEANING & MAINTENANCE
Caution! Ensure the appliance is switched off during all actions and the
!
switching power supply is disconnected from the power outlet!
Display Actions
8 WATER Remove upper housing. Fill lower housing with tap water to the
WATERLINE marking. Place upper housing on lower housing and
put appliance in operation again.
i
display appears. In the HUMIDITY display 1, two lines will flash and
the humidity in the room is not shown.
To humidify and clean the indoor air continuously, we recom-

mend refilling the water in a timely manner.
9 SERVICE Remove upper housing. Drain residual water from lower housing.
Rinse lower housing and disk stack. Fill lower housing with tap
water up to the WATERLINE marking maximum and add the Venta
hygiene additive (for dosage see scale on rear of bottle). Re-assem-
ble the appliance. Touch the SERVICE indicator 9 on the display
and hold for 3 sec. until it switches off.
i
to be carried out.
This action can be carried out if required, even if the SERVICE

message is not shown. When it is completed, simply touch the
SERVICE indicator 9 and hold for 3 sec. The next reminder will now
be shown again in 14 days with the SERVICE message
Any remaining liquid in the water tray and on the disk stack (white, green-yellow
or brown deposits or discolorations) do NOT impair the function of the appli-
ance. For the six-monthly cleaning, we recommend the Venta Cleaner. Please
note the instruction manual included with the Venta Cleaner.
As soon as there is not enough water in the lower housing, the
appliance is switched off automatically and the WATER
For flawlessly hygienic continuous operation, the SERVICE
display indicates a reminder every 14 days that this action needs
8 9
EN 31