Parrot AR.Drone 2.0 Guía De Instalación Rápida página 25

Flip
• To perform a flip with your AR.Drone 2.0:
1. Turn on the Flip enabled
2. Touch the screen of your Smartphone twice.
Note: Before turning on the
2.0 (space, height, weather, wind, etc.).
Battery
• The battery indicator on the screen of the smartphone shows battery level and becomes red when
the AR.Drone 2.0 battery is running low.
• If the battery is running low, the pilot will be requested to land safely. If the pilot fails in landing the
AR.Drone 2.0 in due time the autopilot will land the AR.Drone 2.0 automatically. We recommend
you to land your AR.Drone 2.0 as soon as the battery level indicator becomes red in order to avoid
any injury to any person, property or animal.
Landing safely
Make sure the AR.Drone 2.0 is flying above a clear, solid, flat and dry area and tap
Disconnection during the flight
• If the AR.Drone 2.0 is too far from the smartphone (about 50 meters depending on the wi-fi environ-
ment) it may disconnect. Do not close the application. Come closer to the AR.Drone 2.0 to recon-
nect automatically. The AR.Drone 2.0 's position will be fixed by the autopilot until you reconnect.
If the AR.Drone 2.0 was flying above 6m of altitude before disconnection then the autopilot returns
it down below 6m where it can manage height.
• If you receive a phone call while flying the AR.Drone 2.0 , the autopilot fixes the AR.Drone 2.0 's
position and keeps it in hover flight. If you selected the Indoors mode, the autopilot will land the
AR.Drone 2.0 automatically.
option in the AR.Drone 2.0 settings.
Flip option, make sure that the conditions are suitable for the AR.Drone
.
English 25