Parrot AR.Drone 2.0 Guía De Instalación Rápida página 30

Ocultar thumbs Ver también para AR.Drone 2.0:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 55
your local municipality authority. You can also
contact the retailer from which you purchased
your AR.Drone 2.0 – he might have put in place
recycling services or he may be part of a specific
recycling scheme.
This product will be then treated in an environ-
mentally sound manner at a licensed recycling
plant and its components will be recovered,
recycled or reused in the most efficient man-
ner, in compliance with the requirements of the
Directive on Waste Electrical and Electronic
Equipment (2002/96/EC) of 27 January 2003 (as
subsequently amended or replaced).
Declaration of Conformity CE
Parrot SA, 174 quai de Jemmapes,
75010 Paris, France, declare under
their sole responsibility that the pro-
duct described in this user guide complies with
technical standards EN 301489-17, EN300328,
EN71-1, EN71-2, EN71-3, EN62115 following the
provision of the Radio Equipment, Telecommuni-
cation Equipment directive (1999/5/EC R&TTE),
and of the General Safety directive (2001/95/EC).
http://ardrone.parrot.com/parrot-ar-drone/uk/
support/ardrone_ce_conformity_declaration.pdf
FCC and iC Compliance statement :
This equipment has been tested and found
to comply with the limits for a Class B Digital
Device, pursuant to Part 15 of the FCC Rules
/ with Industry Canada Licence-exempt RSS
standard(s). These limits are designed to provide
30
English
reasonable protection against harmful interfe-
rence in a residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in accor-
dance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not
occur in a particular installation. If this equip-
ment does cause harmful interference to radio
or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment
and receiver.
- Connect the equipment to an outlet on a cir-
cuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV
technician for help.
This equipment complies with Part 15 of the
FCC Rules / with Industry Canada Licence-
exempt RSS standard(s). Operation is subject to
the following two conditions:
This equipment may not cause harmful interfe-
rence.
This equipment must accept any interference
received, including interference that may cause
undesired operation. Modifications not autho-
rized by the manufacturer may void the user's
authority to operate this device.

Publicidad

Tabla de contenido
loading

Tabla de contenido