The Controls Of Your Beverage Center; Electronic Display; Setting The Temperature - Danby Silhouette DBC2760BLS Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The Controls of
your Beverage Center
1
2
1. Run
Indicator light illuminates to signify the
cooling mode is currently in operation.

2. Electronic Display

Dispay screen shows current cabinet
temperature and set temperature. (see
'Setting the Temperature' below)
Setting the
Temperature
When you plug in your
Beverage Center for the first
time, the temperatures
will automatically be set
to 45°F (7°C) and 54°F
(12°C) in the left and right
compartments respectively
and will be displayed in
the Fahrenheit scale (°F).
Operating Instructions
3. C° / F°
Adjacent indicator light denotes which
scale of temperature is displayed.
4. 'UP' Button
Used to raise (warm) the temperature
in 1° degree increments.
'DOWN' Button
Used to lower (cool) the
temperature in 1° degree increments.
• To switch the display
between the Fahrenheit (°F)
and Celsius (°C) scale,
depress the UP and DOWN
control buttons simultaneously for
approximately five (5) sec-
onds
• The temperature range for
both compartments can be
set as low as 39°F (4°C) or
as high as 64°F (18°C) to suit
your specific wine storage
requirements. Each depres-
sion of the UP or DOWN but-
ton will allow you adjust the
temperature in 1° degree
increments within the afore-
mentioned range.
6
3
4
• You may view your 'set'
temperature at any time by
briefly depressing either the
'UP' or 'DOWN' button. The
set temperature will flash in
the display area for 5 sec-
onds before the display
resumes showing the current
cabinet temperature.
Please note: In the event of
a power failure or interrup-
tion, all modified settings are
lost and the default settings
are used once power
resumes.

Publicidad

Tabla de contenido
loading

Tabla de contenido