Philips Power Flosser 3000 Serie Manual página 13

3 Open the lid, fill the reservoir with lukewarm water to the
MAX fill line.
4 Close the lid. Place the reservoir back on the base.
Note: Press down firmly to ensure there is no gap between
the reservoir and the base.
5 Insert your preferred nozzle into the handle. Press the nozzle
down until you hear a "click".
6 Press the on/off button on the base station to turn on the
product. Select your desired mode and intensity.
ANGZE_Powerflosser_3000.043.4472_BOOKLET-Opmaak_A6_bl.indd 13
13
English
10-02-20 10:53