Bosch Dremel Versa PC10 Instrucciones De Funcionamiento Y Seguridad página 15

2610054085.qxp_Layout 1 5/28/19 7:21 AM Page 15
Step 1
Versa to only charge Dremel Versa. Using
Dremel Versa power adapter to charge
other products may result in tool and
property damage and personal injury.
vided by Dremel. Use of other USB cables
may result in tool and property damage
and personal injury.
Your Dremel Versa does not come com-
pletely charged from the factory. Be sure
to charge tool prior to initial use.
To charge:
A. Insert USB cable into USB port of
Power
Adapter
Fig. 2
Use power adapter
provided with Dremel
Charge Dremel versa
with a USB cable pro-
USB
Cable
Charging Tool
power adapter.
B. Plug power adapter into standard
power outlet.
C. Plug micro USB plug into Micro USB
port of the tool.
The blue LED light located on the tool
housing below the USB outlet will turn on
to signal the battery is receiving a charge.
When the tool is fully charged (approx. 2
Hrs 45 min.), charging will automatically
stop and the blue LED light will turn off.
Note: charging function stops while tool is
running and resumes again after tool is
turned off.
When the battery is depleted, the tool will
Charging
Light
15