HIKOKI UB 18DD Instrucciones De Manejo página 6

English
USB DEVICE CONNECTION
PRECAUTIONS
When an unexpected problem occurs, the data in a USB
device connected to this product may be corrupted or lost.
Always make sure to back up any data contained in the USB
device prior to use with this product.
Please be aware that our company accepts absolutely no
responsibility for any data stored in a USB device that is
corrupted or lost, nor for any damage that may occur to a
connected device.
WARNING
○ Prior to use, check the connecting USB cable for any
defect or damage.
Using a defective or damaged USB cable can cause
smoke emission or ignition.
PRECAUTIONS REGARDING THE DUST-RESISTANCE AND WATER-
PROOFING FUNCTIONS
This product conforms to IP65 protection class ratings (dust-resistance and water-proofi ng) for electrical equipment as
stipulated by the international IEC regulations. (When the battery is attached to the tool's body, the battery cover and USB
port rubber cover are closed, and the AC socket rubber cover is closed or the AC cord is properly attached, the tool's body
alone meets the equivalent of the IP65 protection standard.)
[Descriptions of IP Codes]
IP65
Protection rating for water penetration
Water sprayed from any direction shall have no harmful eff ect (water spray proof)
Protection rating for external assault by solid objects
Dust does not enter (dust-resistant)
The equipment has been designed to withstand the eff ects of dust and water, but there is no guarantee that it will not
malfunction. Do not use or leave the equipment in locations where it is subject to excessive amounts of dust, or in locations
where it is submerged in water or subject to rainwater.
NAMES OF PARTS (Fig. 1–Fig. 9)
Battery level indicator
lamp
Switch
Adjustment dial
LED light
LED cover
Handle
Stand
Battery
(sold separately)
Battery cover
Lock
Screw hole for tripod
(5/8-UNC)
USB port
AC socket
Hole (16 mm)
AC cord
Lock ring
Latch
Terminal
Rubber cover
Plug of AC cord
Pilot lamp
Tripod
USB cable
Adapter
○ When the product is not being used, cover the USB port
with the rubber cover.
Buildup of dust etc. in the USB port can cause smoke
emission or ignition.
NOTE
○ There may be an occasional pause during USB
recharging.
○ When a USB device is not being charged, remove the
USB device from the work light.
Failure to do so may not only reduce the battery life
of a USB device, but may also result in unexpected
accidents.
○ It may not be possible to charge some USB devices,
depending on the type of device.
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
UB18DD : Cordless Work Light
To reduce the risk of injury, user must read
instruction manual.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in accordance
with national law, electric tools that have
reached the end of their life must be collected
separately and returned to an environmentally
compatible recycling facility.
Direct current
Alternating current
Do not stare at operating lamp.
6