Better Packages PS2A Instrucciones De Uso página 18

1. Always remember to keep fingers away from the cutting mechanism. Always
turn unit off when removing cutting mechanism or performing any other type of
maintenance.
2. Unplug cutting mechanism cord on front of unit.
3. By pressing down on the button at the top of the cutting mechanism and
simultaneously pulling it forward, the entire mechanism will come free from the
machine,
Clean Blade
Clean the blade on a weekly basis or when adhesive build-up effects proper
dispensing of the tape. Regular cleaning will extend the life of the blade and ensure
that adhesive build-up will not deteriorate performance.
Warning: Be sure the dispenser is unplugged before performing and cleaning
procedures.
Fuse Replacement
If it is necessary to replace the fuse (1.5 amps) it is located in the rear of the
machine. Simply remove fuse cover by turning it counterclockwise, remove old fuse
and replace with new fuse. Re-connect the fuse cover.
Release
Button
Blade
Cord
Fuse Assembly