Securing Crossbeams And Vertical Crossbeams; Inserting Cross Braces - Workzone R175GS Manual Del Usuario

2 Securing crossbeams and vertical
crossbeams
Step 2.1: Hammer in crossbeams and vertical
crossbeams
5
12

3 Inserting cross braces

Step 3.1:
6
90°
2
Insert and fasten cross braces
4
1. Use a hammer to hammer
in the inserted crossbeams
and vertical crossbeams
2. To protect the material, place a
piece of wood or fabric under it.
1. Insert the cross braces
the place provided as shown.
First, bend the bracket 90° to
secure the cross brace to the
180°
vertical crossbeam
2. To attach the brackets, bend
them 180° as shown. Use a flat-
headed screwdriver
this.
3. Repeat steps 1 and 2 for the four
remaining cross braces.
Assembly
12
3
2 .
4 in
2 .
13 for
11