Connecting Supports And Beams - Workzone R175GS Manual Del Usuario

1 Connecting supports and beams

Step 1.1: Connect crossbeam
1
1
3
Step 1.2:
2
1
3
Connect further crossbeams
1. Take two supports
connect them with a
crossbeam 3
Ensure the crossbeam and
supports are correctly aligned.
The crossbeam must be
installed no higher than 5.91"
(150 mm).
1. Take another two cross-
beams 3 and connect them
to the two supports
sure that the metal lugs of the
crossbeams snap back into the
openings of the supports.
2. Repeat steps 1.1 and 1.2 for the
remaining two supports and
three crossbeams.
Assembly
1 and
as shown.
1 . Make
9